This James W Scoville building Elmslie “Sullivanesque” sculpture is now out of the kiln, it is still about 200 degrees and had to be handled with gloves, it turned out perfect! One can see the color change in photos from the previous dry/unfired state and now that it’s been fired to a little over 2,079 degrees, actually cone 2 tipped because I added a 15 minute “hold” at the set temperature, but because of the “heat work” it went a little higher, but the result is better and the color is nice and even top to bottom, whereas in the past the very bottom of large pieces like this would…