I just ordered the two gallons of pourable mold rubber I need to “convert” my “Sullivanesque” design that was recently finished- into a form I can take a plaster piece mold from for pressing terracotta into. Two gallons is not enough to fill the mold, it is only enough to pour about 1″ deep, the rest of the depth will have to be plaster to save on the costs of not having to buy two more gallons of expensive rubber.
-
-
Louis Sullivan Sullivanesque mold finished, and a timelapse video.
At last the mold is finished along with the complete time lapse video for that process; I also cast the first interior cast from the mold and gave it a weathered antiqued wash so I could get a photo. It will be available in brick red, kiln fired terracotta as well. To purchase a cast of this design; https://www.urbansculptures.com/cart/product/sullivanesque-panel-after-james-w-scoville-chicago-nr-ls-2/
-
Louis Sullivan, Elmsley, Schneider James W Scoville building Chicago, mold
Now with the clay model done and ready to make the mold of this interesting webbed lotus flower motif, I have begun that process today and will be finishing it to-morrow A timelapse video of the process; https://www.youtube.com/watch?v=CBhOYdwVyhU
-
Louis Sullivan, Elmsley, Schneider James W Scoville building Chicago, progress for 11/21/2018
More detailing is roughed in as is the background texturing, the clay needs to firm up a little before I finish it up. Hope to get that done this week and weekend, and make the rubber mold next weekend.
-
Louis Sullivan, Elmsley, Schneider James W Scoville building Chicago, progress for 11/9/2018
Some more progresss for today! And today Nov 10th. The sales link for the pressed terracotta is here https://www.urbansculptures.com/cart/product/sullivanesque-panel-after-james-w-scoville-chicago-nr-ls-2/ There will be an interior cast-stone version available first.
-
Antique Louis Sullivan “Sullivanesque” panel arrived
My purchased piece of Sullivanesque came today, from the 1936 Thomas A. Edison school, Hammond Indiana. The design is such that it could be situated either way shown in the first 2 photos, but hard to tell which way it was originally meant to be installed and was, it looks good either way it’s rotated, and the impressed numbers on one surface which I remember from the pieces in NYC were always on the TOP side. So which way did this go… it’s easier than it might seem to figure it out even without aphoto of the school to tell- the last photo up close tells the whole story, that…
-
Louis Sullivan, Elmsley, Schneider James W Scoville building Chicago, progress for 11/4/2018
Making progress on roughing out this Sullivanesque model.
-
My Sullivanesque model,
I had to dig out some old unfired very fragile clay models of mine from the corner in the utility room since I had to replace the sump pump hose. This model of a Louis Sullivan design I did in 2008, I’m likely going to convert it to do it in terracotta, so I left the unfired clay model out to look over and plan for that. This was not simply molded off an existing piece, it was modelled by me in 2008 for a Chicago client’s townhouse when he couldn’t find the exact design and quantity etc he wanted, so his contractor got hold of me and the end…
-
Louis Sullivan, Elmsley, Schneider James W Scoville building Chicago, progress for 11/3/2018
More progress today roughing out the upper half of this Adler & Louis Sullivan, George Elmsley, Kristian Schneider, James W Scoville building 1894 design